Angle steel punching and shearing machine surface should not have patterns not defined by the convex, concave and rough, plate and casting of the door, cover joint should not be unbending edge sign, everywhere oil cup should be filled with grease, gear should also add lubricating oil. Move the machine by hand, check whether the running environment of the machine is good and normal, and verify the shear gap.

In the hand to move mechanical, that the running environment is good, and then start the motor, make it idle, check the operation of the environment. After installation, the mechanical friction surfaces shall be cleaned and lubricated. Bottom, paint bag should be too fine removal of bottom rust, molding sand, oil and other dirt. Paint appearance should be complete, smooth, uniform and tonal uniform, there should be no freckles, wrinkles, mechanical all parts and accessories of the unprocessed surface according to the appearance of the environment, paint. Bubbles and attachments. Joint punching and shearing machine where the joint needs to be removed, paint and cut. Scrub mechanical, do not use emery cloth or other hard, and its corrosive detergent. Empty running test for 2 ~ 4 hours, check the bearing temperature is not higher than 60 ~ 65℃, no unusual signs.

For the market, there is no saturation means there is a market, there is economic interest. So now in terms of the current market form or market needs, metal or these related industries, or more business opportunities. Another thing is that there are a lot of high-tech things out there, especially big high-tech things like cars. Then the production or processing of these items is necessary for the processing of these items of the machine. Then this time naturally thought of the punching and shearing machine tool industry. Can do butt cutting on the edge of flat iron, two piece working plate, with scale and positioning block, easy to work. It is a new product of domestic combined punching and shearing machine, which can shear plate, square steel, round steel, Angle steel, channel steel, i-steel, punching, die cutting, and cooperate with shearing and blocking device.

It is because of its excellent performance, the number of manufacturers on the market continues to increase, with the continuous development of science and technology, also promote the type of combined punching and shearing machine on the market continues to increase, including hydraulic multi-functional combined punching and shearing machine, hydraulic combined punching and shearing machine, multi-functional combined punching and shearing machine, etc. Have been widely used, the performance of products are very superior, the internal structure is compact; Beautiful appearance; The long time of use of the equipment, even if the long-term use will not affect its performance; But in the long-term use of the process should also do a good job in daily maintenance, so that it can ensure that in the long-term use of the process has been a good performance; Before use must check whether the parts are intact, if found damaged parts, must be timely replacement, ensure the normal work; The equipment in the use of the process is very safe, will not cause any harm to the environment and personnel, you can rest assured to use.